MioMIt can be frustrating and potentially costly if you’re experiencing water damage in your Samsung Galaxy’s charging port. However, you can take a few steps to try and fix the problem yourself before turning to professional repair services. The first step is removing any excess water from the charging port by gently shaking the phone and using a small, soft-bristled brush or toothpick to dislodge debris.
Next, try using a vacuum cleaner with a small attachment to suck out any remaining water. Be sure to use a low suction setting to avoid damaging the charging port. If the water damage is severe, you can use a small amount of isopropyl alcohol on a cotton swab to clean the charging port.
Be sure to dry the port with a clean cloth before charging your phone again. If these steps do not work and your phone won’t charge, you may need professional help.
Charger Port Module / Daughter Board Must be Replaced
If the water damage to your Samsung Galaxy’s charging port is more severe, you may need to replace the charger port module or daughter board. This small circuit board connects the charging port to the main motherboard of the phone and is responsible for controlling the charging process. Replacing this component is a more advanced repair that typically requires some technical knowledge and specialized tools.
Before attempting this repair, it’s essential to ensure that you have the correct replacement part for your specific model of Samsung Galaxy. You can find the replacement part online or at a repair shop specializing in mobile phone repairs.
Once you have the replacement part, you need to open the back of the phone and disconnect the battery to access the charging port module. Carefully remove the damaged module and replace it with the new one, making sure to connect all the cables and connectors properly.
It is important to note that if you’re not familiar with electronic repair and troubleshooting, it’s best to seek help from a professional technician to avoid further damage to your phone.
Can you clean the port to remove the moisture detection warning on Samsung?
Cleaning the charging port on a Samsung phone may help remove debris and dry out the area, but it will not remove the moisture detection warning. This warning is triggered by a sensor within the charging port that detects moisture and is designed to prevent damage to the phone’s internal components. Once the sensor is triggered, the warning will remain until the sensor is reset or replaced.
The charging port module or daughter board needs to be replaced to remove the moisture detection warning and fully fix the problem. It is a small circuit board that connects the charging port to the main motherboard of the phone and is responsible for controlling the charging process. If you don’t know how to fix your phone, it is better to ask for help from someone who knows what they are doing. This way, you can avoid making the problem worse.
Will Samsung Cover Moisture in Charger Port under Warranty in Australia?
Samsung generally does not cover water damage under warranty in Australia. The company’s warranty typically only covers defects in materials or workmanship, and damage caused by liquid is generally considered accidental and not covered. If your Samsung Galaxy has water damage in the charging port, it will likely be considered a billable repair.
However, It is always best to check the terms and conditions of your specific warranty, as some insurance policies may cover accidental damage.
Additionally, you can contact Samsung Australia support or customer service to confirm whether the water damage in your charging port is covered under warranty.
If your device is out of warranty, you can take it to a Samsung Authorized Service Center or a third-party repair shop, such as Galaxy Repairs, specializing in mobile phone repairs. They can replace the charging port module or daughter board, typically the cause of water damage. The cost for this repair varies, but it is usually around $70 to $120. Additionally, if you need an official Samsung charger, it costs around $180.
How long does a Samsung Type-C Charge Port Board Take to Repair?
The time it takes to repair a Samsung Type-C charging port board can vary depending on the device’s specific model and the technician’s skill level. However, it is generally a relatively quick and straightforward repair that should take less than one hour.
The process of repairing a Type-C charging port board typically involves removing the device’s back cover, disconnecting the battery, and then carefully removing the damaged charging port module. The new module is installed and connected to the device’s main motherboard, and the back cover is re-attached.
It’s important to note that if the device is still under warranty, it’s better to contact Samsung Australia Support before attempting a repair. They might be able to fix it for free or recommend an authorized service center.
Overall, if you’re going to a professional repair shop, the repair process should take less than an hour, and you should be able to pick up your phone and use it again with a working charging port.
Final Thoughts
In conclusion, water damage to a Samsung Galaxy’s charging port can be frustrating and potentially costly, but it can be fixed with the proper steps. If the damage is minor, you may be able to remove the excess water and debris yourself using a small brush or vacuum cleaner. However, if the damage is severe, you may need to replace the charging port module or daughter board.
It’s essential to remember that Samsung does not cover water damage under warranty in Australia, and it may be considered a billable repair. But checking your warranty terms and conditions is always a good idea. Moreover, you can always contact Samsung Australia support or customer service to confirm the warranty status of your device.
If you’re uncomfortable with electronic repairs, it’s best to seek help from a professional technician or take your device to a Samsung Authorized Service Center or a third-party repair shop. They can diagnose the problem and repair it quickly and efficiently. The repair cost varies, but it’s usually around $70 to $120, and you’ll be able to pick up your phone and use it again with a working charging port in no time!